Home > Shutter Repair
We provide replacement shutter parts & hardware to repair your vinyl polysatin shutter & plantation shutter.

Common Wear & tear due to sun exposure are: broken cufflink, broken connectors, missing tilt bar, missing staples, lost tension, broken magnets.... Without these basic, essential parts, your expensive shutter are lifeless!
  • Polysatin Shutters are made of UV resistant vinyl, so they don't warp, crack, chip, peel or discolor, regardless of the extreme heat.
  • Hardwood Shutter are created from real wood.
  • Hybrid Shutter are blend of real wood and modern-day materials

We are Hunter Douglas Service Center and Certified Master Shutter Installer. If your shutters are still under warranty, please contact us to schedule your repair servic
Click on the Group Images Below to Select Your Shutter Repair Parts
Sort By:
Page of 2
Louver Repair Pin, Spring Loaded, 3/4" Long

  • Louver Repair Pin 3/4" Long, Spring Loaded
  • Commonly to repair Vinyl, Polysatin, Hunter Douglas Palm Beach, Hybrid Shutter

Our Price: $1.00
3 1/2" Louver Connector for Vinyl Shutter. 2 connectors per slide

3 1/2" Louver Connector for Vinyl Shutter. 2 connectors per slide

Our Price: $2.00
Louver Cuff Link. Pin to connect Tilt Bar to Louver. Shutter (#1)

  • Louver Pin to connect Tilt Bar to shutter louver.
  • Off White Silky Color
  • Commonly used in Vinyl, Polysatin, Hunter Douglas Palmbeach shutter

Our Price: $2.00
Front Tilt Bar Vinyl with Caps. Hollow Core. Off White. Eclipse. Shutter Rod

  • KIT Includes: 1 Tilt Bar & 2 End Caps
  • Select Length: 24", 36", or 48"
  • Front Tilt Bar Vinyl.  Hollow Core. Off White
  • Commonly used with: By The Ways, Summer Wind, Hunter Douglas shutter

Our Price: $20.00
Compact Front Tilt Bar Vinyl with End Caps. Hollow Core. Off White. Palm Beach Shutter

  • KIT includes: 1 Tilt Rod & 2 End Caps
  • Select  Length: 24", 36", or 48"
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach shutter

Our Price: $20.00
DESIGNER MAGNET ASSEMBLY KIT. WHITE. HUNTER DOUGLAS

KIT includes:

  • White Magnet
  • Slim Plate
  • 3 screws
Designer Magnet Assembly Kit. White color. Hunter Douglas logo

Our Price: $5.99
CUSTOM CUT & PREDRILLED. Front Tilt Bar Vinyl with End Caps. Hollow Core. Off White. Palm Beach Shutter

  • KIT includes: 1 Tilt Rod & 2 End Caps
  • Select  Length: 24", 36", or 48"
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach shutter

Our Price: $20.00
Custom Cut Length Front Tilt Bar Vinyl with End Caps. Hollow Core. Off White. Eclipse By The Ways. Shutter Rod

This is a CUSTOM CUT tilt bar. So please specify exactly the length. When you are at final step of Check Out, there's NOTE box that you can specify exactly how long is your Tilt Rod.

  • Select (up to) 24" OR (up to) 36", for check out purposes only
  • Front Tilt Bar with Hollow Core. Vinyl. Off White
  • Commonly used in Shutter: Vinyl, Polysatin, Hunter Douglas Summerwind, BytheWays Eclipse
  • Include 2 End Caps

Our Price: $25.00
Cuff Link to connect Front Tilt Bar to Louver for Vinyl Shutter.

  • Cuff Link to connect Front Tilt Bar to Vinyl Louver
  • Off White Color
  • Commonly used in Vinyl, Polysatin, Hunter Douglas Palmbeach shutter

Our Price: $2.00
Pin for Shutter Hinge. OFF WHITE. 2.5" long

Pin for Shutter Hinge. OFF WHITE Top. 2.5" long

Our Price: $1.50
2 1/2" Louver Connector for Vinyl Shutter. 3 connectors per slide

2 1/2" Louver Connector for Vinyl Shutter. 3 connectors per slide

Our Price: $2.00
3 1/2" JOINER for Plantation Shutter. Off White color

3 1/2" JOINER for Plantation Shutter.  Off White color

Our Price: $3.00
Magnet Assembly Kit for Shutter. BROWN. Rectangle Shape

KIT includes:

  • Dark Brown Magnet
  • Dark Brown Plate
  • 3 brown screws

Our Price: $4.99
Magnet Catch & Plate Assembly Kit for Shutter. WHITE. Rectangle Shape

SHUTTER MAGNET KIT, includes:

  • Magnet Catch & Plate Off White Color
  • 4 screws

Our Price: $4.99
Designer Magnet Assembly Kit for Shutter. Cherry Brown color. Hunter Douglas

Designer Manget Assembly Kit for Shutter. Cherry Brown color. Hunter Douglas

Our Price: $5.99
3 1/2" Elliptical JOINER for Plantation Shutter. MALE

3 1/2" JOINER for Plantation Shutter.  Off White color

Our Price: $3.00
3 1/2" Elliptical JOINER for Plantation Shutter. FEMALE

3 1/2" JOINER for Plantation Shutter.  Off White color

Our Price: $3.00
3 1/2" JOINER for Plantation Shutter.

3 1/2" JOINER for Plantation Shutter.  Off White color

Our Price: $3.00
Standard Louver Pin, Flat Head, 1" Long

  • Standard Louver Pin, Flat Head, 1" Long

Our Price: $0.50
End Cap for Vinyl Front Tilt Bar with Hollow Core. Shutter.

  • End Cap for Front Tilt Bar with Hollow Core.
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach
  • INSTRUCTIONS

Our Price: $1.50
REAR ROD LOUVER CUFFLINK, WHITE, PALM BEACH SHUTTER

  • Rear Tilt Bar Connector
  • Off White Color
  • Commonly used in Vinyl, Polysatin, Hunter Douglas Palmbeach shutter

Our Price: $2.00
2 1/2" Standard Louver End Cap for Vinyl Shutter. Front Tilt. Off White color

  • 2.5" Louver End Cap Polysatin, Vinyl. Off White color
  • Front Tilt
  • For Hunter Douglas Palm Beach Shutter

Our Price: $5.00
Interpanel Clips for Shutter. Clear

  • Interpanel Clips for Shutter. Clear
  • Commonly used in Plantation Shutter, Hunter Douglas Palm Beach Shutter & other brands

Our Price: $1.50
Rear Tilt Bar Connector for Vinyl Shutter, Palmetto Cufflink.

  • Rear Tilt Bar Connector
  • Off White Color
  • Commonly used in Vinyl, Polysatin, Hunter Douglas Palmbeach shutter

Our Price: $2.00
Rear Tilt Bar Pin for shutter. Hunter Douglas

  • 3/4" Fabric Carrier for Duette Vertiglide Head Rail by Hunter Douglas
  • Use together with old Vertiglide part #1454 (bearing wheel)

Our Price: $1.99
Tensioner Louver Nylon Pin, Dome Head, 1" Long

  • Tension Louver Nylon Pin
  • Dome Head, 1" Long
  • Commonly used in New Style Hybrid Shutter

Our Price: $0.75
3 1/2" Louver End Cap for Vinyl Shutter. Rear Tilt. Clearview. Off White color

  • 3.5" Louver End Cap Polysatin, Vinyl. Off White color
  • Rear Tilt
  • For Hunter Douglas Palm Beach Shutter Clearview

Our Price: $5.00
1/4" x 5/8" Staples to connect Wood Tilt Bar to Louver. Plantation Shutter.

  • GALVANIZED STAPLES for WOOD TILT BAR
  • Pack of 20 staples
  • INSTRUCTIONS: Typical use is 5/8" for Tilt Bar and 7/8" for Louver. If needed, apply glue to feet of staples for secure fit.

Our Price: $3.00
1/4" x 7/8" Staples to connect Wood Tilt Bar to Louver. Plantation Shutter.

  • Galvanized Steel for Louvers
  • Pack of 20 staples
  • INSTRUCTIONS: Typical use is 5/8" for Tilt Bar and 7/8" for Louver. If needed, apply glue to feet of staples for secure fit.

Our Price: $2.00
3/16" x 1" Staples, Galvanized Steel 19GA. Plantation Shutter.

  • 1" x 3/16" CROWN
  • Galvanized Steel 19GA STAPLES R13BAB
  • Pack of 20 staples
  • INSTRUCTIONS: Typical use is 5/8" for Tilt Bar and 7/8" for Louver. If needed, apply glue to feet of staples for secure fit.

Our Price: $1.00
Gear for Polysatin shutter, Lantana, No Tilt Bar

  1. Gear for Polysatin shutter
  2. No Tilt Bar style
  3. Lantana, Hunter Douglas

Our Price: $2.99
4 1/2" Louver End Cap for Vinyl Shutter. Standard

  • 4.5" Standard Louver End Cap Polysatin, Vinyl
  • For Hunter Douglas Palm Beach Shutter

Our Price: $5.00
4 1/2" Louver End Cap for Vinyl Shutter. Clearview

  • 4.5" Louver End Cap Polysatin, Vinyl
  • For Hunter Douglas Palm Beach Shutter with Clearview.  No Tilt Bar Shutter.

Our Price: $5.00
3 1/2" Louver End Cap with Gear for Vinyl Shutter

  • 3.5" Gear Louver End Cap Polysatin, Vinyl
  • For Hunter Douglas Palm Beach Shutter with Lantana System.  No Tilt Bar Shutter.

Our Price: $5.00
3 1/2" Tilt Bar Connector. 1 connector per slide

  • 3 1/2" Tilt Bar Connector. 1 connector per slide
  • Off White Milky Color
  • Commonly used in Vinyl, Polysatin, Hunter Douglas Palmbeach shutter
  • Minimum Order Quantity applied when added to Cart.
  • INSTRUCTIONS:

Our Price: $2.00
Stile Jamp Cap (end cap) for Shutter. White.

  • Stille Jamp Cap. White.
  • Commonly used in Hunter Douglas Palm Beach Shutter & other brands

Our Price: $1.99
End Cap for Front Tilt Bar, Polysatin Shutter

  • White End Cap for Front Tilt Bar Shutter
  • Fit Hollow Core Tilt Bar. Tilt Bar NOT included

Our Price: $2.00
Hinge Shim, Tensioner for Shutter. Super Slim, Clear

Commonly used on shutter as hinge shim. OR added at vinyl end caps between louver & stile to create for friction for tensioning.

Includes 2 shims, C shaped.

Our Price: $1.99
Custom Wood Tilt Bar with PreDrilled Staple Holes for Plantation Shutter or Hybrid Shutter

Custom Order Only. Solid Wood Tilt Bar for Plantation & Hybrid Shutter. Tilt Rod Replacement Kit.

  1. Specify your Rod Length, up to 24" OR up 36". Then specify the exact length at ORDER COMMENT box before PLACE ORDER icon.
  2. Count how many louvers were attached to the OLD tilt rod
  3. Measure the distance between the existing staples (of the old bar). Common spacing is: 2", 3", or 4"
  4. Select your color:

Our Price: $35.00
KIT. L Brackets & screws to reinforce loose shutter corners

L Brackets to repair shutter panels that sag, loosen up. KIT includes:

  • 2 @ L Brackets, zinc
  • 8 @ 1/2" hinge screws #6
Sample pictures are old bifold shutters. Since the corners are loosen up, all louvers are falling aparts and cause adjacent panels to sag. If you prefer other color than zinc, just paint over the brackets with your desired color after repair.

Our Price: $5.99
Plastic Frame Corner Key for Palm Beach Polysatin Shutter

Plastic FRAME Corner Key for Palm Beach polysatin shutter.

If your shutter frame is wide, we strongly recommend to reinforce the 4 corner frame with L brackets (part #5550) to strengthen the frame & prevents it from sagging/pulling apart in the long term.

Our Price: $1.99
Black Tension Spring for Plantation Shutter

  • Shutter Tension Spring
  • 7/8" long
Tension Spring is used to keep louvers in desired position instead of flopping down. Place the tension spring behind the nylon louver pin in the shutter stile. The spring pushes the louver into the opposite stile creating tension. It helps to prevent the louvers from being dragged down and keep louvers where you want them to be.

Depend on the size & weight of your shutter panel, a minimum of 2 tension springs must be used per panel to provide proper tension.

Our Price: $1.50
Nylon Tension Washer for Plantation Shutter

  • Nylon Tension Washer
  • 3/8" outside diameter, 3/16" inside diameter
Tension Washer is placed under the head of the tension screw inside the 1/4" pin hole of the stile. Nylon has a low friction resulting in smoother operation of louvers.

To be used in conjunction with Tension Bushing.

Our Price: $0.25
Tension Screw Bushing for Plantation Shutter

  • Plastic Tension Screw Bushing
  • 3/8" outside diameter, 3/16" inside diameter
  • 1/4" height
Tension Bushing supports tension screw in 1/4" pin hole. The flange of the bushing prevent the louvers from rubbing directly against the stile (when you tighten the tension screw). As a result, operation of louvers is smoother.

The bushing reduces the size of the pin hole to support & center the tension screw. A tension washer should be used in conjuntion of the bushing to allow the tension screw to rotate with louver and prevent it from backing off.

Our Price: $0.99