Home >

How to Setup Remote Control WITHOUT HUB

How to Setup Remote Control WITHOUT HUB


 
Alternative Views:





Product Code: REMOTE-CONTROL-SETUP-POWERVIEW
Qty:

Description
 
Essential Connections on Powerview Remote Control:
STEP 1/ Programming Mode. Video of How to Enter and Exit Programming Mode
  • ENTER Programming Mode: Press & Hold STOP Button for 6 seconds until light starts blinking.
  • EXIT Programming Mode: press & Hold Stop Button for 6 seconds until light stops blinking.
Yes, you read that right. This is NOT a typo. Enter OR Exit Programming Mode is exactly the same procedure: Press & Hold STOP button for about 6 seconds. The visible difference is the .... light (ENTER: light flashes. EXIT: light Off)

STEP 2/ Pairing Remotes. Skip to step 3 if you only have 1 remote. If you have more than 1 Remote, then Always Pair ALL remotes BEFORE joining any shade. Video of How to Pair Remotes to a Single Network ID
  • 1/ On back of TARGET remote, use a paper clip to Press & Hold the Reset button for 6 seconds.
  • 2/ on SOURCE Remote, enter Programming mode.
  • 3/ on TARGET remote, Press & Continue to Hold Stop button (until next step "4" is complete
  • 4/ On SOURCE Remote, quickly Press & Release STOP button. (Group 1-6 should flash twice on Target Remote). Your remote is now paired.
STEP 3/ Join Shade to a Group. A single shade can be joined to multiple groups on the same remote
Watch Video: How to Join Shade to a Group of Powerview Remote Control
  • 1/ On Remote, enter Program mode
  • 2/ Press 1-6 to Select Group (1-6).
  • 3/On Shade Headrail, Press & Continue to Hold the Program button until step 4 below is complete
  • 4/On Remote, quickly Press & Release the Open (arrow UP) button (while still in Program mode). Shade should jog (move up/down about 1")
  • 5/On Shade Headrail, Release the Program button
  • 6/On remote, exit Program mode (see step 1). Your shade is now joined to the remote. Video of How to Join a Shade to a Group 1-6

BUTTON FUNCTIONS of the Remote Control (when pressed, the selected # will lit up):
Watch Video: Functions of Buttons on Powerview Remote Control
  • Group 1-6. You can add up to 6 group of shades to 1 remote. Each group control the shades separately, independently. Unless you have a huge home, for simplicity most consumer would assign 1 shade to each group and have 1 remote for each room. For example, you have 3 shades in Family Room. Assign group 1 to Left shade, 2 to Middle Shade, 3 to Right Shade. Press 2 will only operate Middle Shade
  • ARROW OPEN/CLOSE. let you Open = Raise up OR Close = lower down the shade.
  • STOP. Let you stop the shade (while open/close) wherever you want.
  • ALL. Operate ALL groups at the same time. In the example above, Family Room, press ALL, will lower/raise ALL 3 shades at the same time.
  • HEART. Heart button is your programmed Favorite position. It is set at manufacture at half way

  • How to Remove Shade from a Group.
    • 1/ On Remote, enter Program mode.
    • 2/ Press to Select Group (1-6).
    • 3/On Shade Headrail, Press & Continue to Hold the Program button until step 4 is complete
    • 4/On Remote, quickly Press & Release the Close (arrow DOWN) button (while still in Program mode)
    • 5/on Shade Headrail, Release the Program button
    • 6/On Remote, exit Program mode. Video of How to Remove a Shade from a Group 1-6
  • How to Pair a Remote to a Hub. Always Pair Remote to Hub BEFORE joining any shade to the Remote.
    • 1/ on Back of Remote, use a paper clip to Press & Hold the Reset button for 6 seconds.
    • 2/ Keep the Remote & Hub closely together within 12".
    • 3/ Simultaneously, on Remote, Press & Hold the Stop button, AND, on back of Hub, Press & Hold the "P button" for 3 seconds. Always Pair Remote to Hub BEFORE joining any shade to the Remote. Video of How to Pair a Remote to a Hub.

Powerview Step by Step Guide
Best Practices for New Installations of PowerView Shades
Location
  • ROL-SETUPR-R

Accessories
18 Volt DC Power Supply. Work with Hunter Douglas and other major private labeled brands Battery Wand for motorized shades, work with Hunter Douglas and major window coverings brands. NO battery. Case only
Our Price: $79.99

Add
Our Price: $39.99

Add
18 Volt DC Power Supply. Work with Hunter Douglas and other major private labeled brands Battery Wand for motorized shades, work with Hunter Douglas and major window coverings brands. NO battery. Case only