 |
 |
 |
|
KIT includes:
- 1 Cord Loop, WHITE color
- Select cord thickness: D30 (2.7mm), or K35 (3.4mm)
- Select Loop Length: 3ft, 4ft, or 5ft
- 2 Clear Cord Anchors (5466) with 3 screws. Make sure the cord loop has proper tension or it may not move smoothly.
- 1 White Univ Tensioner (5871) & Tensioner Instruction Booklet. NO LOGO
Continuous Cord Loops are commonly used on clutches for duette, silhouette, honeycomb, cellular, pleated shades.
- D30 (2.7mm) is thinner than K35 (3.4mm) & C30, most popular loop
- K35 (3.4mm) is a little thicker than D30, commonly used on Hunter Doulgas silhouette (made after 2010), vignette, pirourette.
INSTALLATION TIPS: when you attach the White Loop Tensioner to the clear mount (either Inside OR Outside Mount), make sure you have the proper amount of tension (by adjusting the spring loaded tension) before screwing it to the wall.
If you pull the cord, and it keeps getting stuck/jammed, then you tension is too loose. You need to move the tensioner further down.
How to install Tensioner for Cord Loop and Bead Loop
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Location
- Custom KIT: Cord Loop + cord tensioner 5571 + clear cord anchor 5466
|
|
|
|
|
|
|