Home > Repair Parts > Tilter, Tilt Control, Wand

When buying Tilter for Horizontal Blinds, it's important to pay attention to 2 things:
  1. The Height of your Headrail. LOW Profile = 1.5", or HIGH Profile = 2", Mini = 1"
  2. The Hole Shape of Your Tilter needs to match the shape of the tilt rod. Common hole shapes are: SQUARE, HEX, D, RECTANGLE
As long as these 2 elements (Height of headrail + Hole shape of Tilter) are the same, the rest of the differences are NOT critical. You don't have to buy exact looking part for the repair. Compatible parts would work fine.

Click on the Group Images Below to Select Your Parts
Sort By:
Page of 2
Wand Tilter 1/4" Modified Hex Hole for 2" Wood, Venetian Blind. Low Profile. Gray

  • 1.5" low profile.
  • Grey plastic body with meta shaft & gear
  • 1/4" Modified HEX hole

Our Price: $10.00
Vertical End Control, #6 bead chain, Rectangle Shape . For Hunter Douglas Permasure, Permatrak Blind

  • Use with #6 bead chain for tilting
  • Commonly used on Hunter Douglas Permatrak, PermAlign Vertical Blind, rectangle shaped headrail

Our Price: $12.00
Vertical End Control, #6 bead chain . For Hunter Douglas Permatrak Vertical Blind

  • End control set,  Rectangle Shape, for Vertical Blinds.
  • Width = 1 7/8". Height = 1 1/4"
  • Use with #6 bead chain for tilting
  • Commonly used on Hunter Douglas Permatrak, Permasure Vertical Blind
  • Grey Plastic

Our Price: $12.00
Wand Tilter 1/4" Hex Hole for 2" Wood, Venetian Blind. Low Profile. White

  • 1.5" low profile.
  • White plastic body with zinc gear & plastic stem. Riveted.
  • 1/4" HEX hole

Our Price: $7.50
Wand Tilter 1/4" SQUARE Hole for 2" Wood, Venetian Blind. High Profile, Metal Shaft & Gear

  • 2" high profile.
  • White plastic body with meta shaft & gear
  • 1/4" SQUARE hole

Our Price: $9.00
Tilter Lock

  • 1.5" low profile.
  • Grey plastic body with meta shaft & gear
  • 1/4" Modified HEX hole

Our Price: $2.50
Wand Tilter 1" Mini Blind, HEX Hole. White. For Hunter Douglas Blind

  • HEX shaped hole
  • Headrail size: 1" x 1"
  • White Plastic Body. Metal Gear & Shaft.

Our Price: $10.00
Wand Tilter 1.5" Mini Blind, 1/4" HEX Hole. White. For Hunter Douglas Blind

  • 1/4" modified HEX shaped hole with Notch.
  • Headrail size: 1.5" x 1"

Our Price: $10.00
Wand Tilter 1" Mini Blind. D Hole. For Hunter Douglas blind

  • D shaped hole
  • Headrail size: 1" x 1"
  • Gray Plastic Body. Metal Gear & Shaft.

Our Price: $10.00
Vertical End Control, #10 bead, Reduced Gear, Rectangle Shape . For Hunter Douglas Vertical Blind

Commonly used on Hunter Douglas Permatrak, PermAlign Vertical Blind, rectangle shaped headrail

Our Price: $12.00
Wand Tilter 1" Mini Blind, D Hole. White. For Hunter Douglas Blind

Mini Blind Tilt Mechanism for 1" Horizontal Blind. Wand Type

Our Price: $10.00
Wand Tilter 1" Mini Blind, HEX Hole. White.

  • HEX shaped hole
  • Headrail size: 1.5" x 1"
  • White Plastic Body. Metal Shaft.

Our Price: $7.00
Vertical End Control, #6 bead chain . For Hunter Douglas Paramount Blind

  • #6 bead chain for tilting
  • Commonly used on Hunter Douglas Paramount Vertical Blind, curved headrail
  • Ivory color

Our Price: $12.00
Wand Tilter 1" Mini Blind w Black Shaft Clip, Hex Hole. Metal.

  • 1/4" Hexagon Hole.  Not all the way thru.
  • Headrail size: 1" x 1"
  • Metal Body, Shaft & Gear.

Our Price: $10.00
Wand Tilter 1" Mini Blind, 1/8" Square Hole. Plastic body w metal shaft

  • 1/8" SQUARE hole
  • Headrail size: 1" x 1"
  • Plastic Body, Metal Shaft, Hook & Sleeve included.

Our Price: $8.00
Vertical End Control, Wand type . For Hunter Douglas Paramount Blind

Commonly used on Hunter Douglas Paramount Vertical Blind, curved headrail

Our Price: $12.00
Vertical End Control, Wand Type, Rectangle Shape . For Hunter Douglas Permasure, Permatrak Vertical Blind

Vertical End Control, Wand Type, Rectangle Shape . For Hunter Douglas Permasure, Permatrak Vertical Blind

Our Price: $12.00
Vertical Wand Control. For Hunter Douglas Paramount Vertical Blind

Vertical Wand Control. For Hunter Douglas Paramount Vertical Blind

Our Price: $12.00
2" Cord Tilter, HEX hole. Low Profile. For Hunter Douglas Blinds

  • 1/4" modified HEX shaped hole with Notch
  • Low Profile 1.5"

Our Price: $10.00
Wand Tilter 1" Mini Blind, D Hole for Levolor Riveria Blind

Mini Blind Tilt Mechanism for 1" Horizontal Blind. Wand Type.

  • D shaped hole
  • Headrail size: 1" x 1"
  • Metal Body, Plastic Shaft, Hook & Sleeve included.
  • Commonly used in Levolor Blind & other brands

Our Price: $12.00
2" Cord Tilter, HEX hole. Low Profile. Metal

  • 1/4" HEX shaped hole
  • Low Profile 1.5"
  • Metal Body

Our Price: $7.00
Wand Clear Plastic 30" long with Hook & Sleeve

  • Clear color can easily blend with any color of blinds.
  • 30in long.  li>

Our Price: $8.00
Clear Wand Tilter 1/4" SQUARE Hole for 2" Wood, Venetian Blind. High Profile

  • 2" high profile.
  • White plastic body with meta shaft & gear
  • 1/4" SQUARE hole

Our Price: $9.00
Wood Wand Off White 30" long with Hook & Sleeve. Hunter Douglas

Wood Wand Off White 30" long with Hook & Sleeve. Hunter Douglas

Our Price: $9.00
Lead Carrier Guide, Permalign, Vertical Blind. Hunter Douglas

Commonly used on Hunter Douglas Paramount Vertical Blind, curved headrail

Our Price: $5.00
Wand Tilter 1" Mini Blind, HEX Hole. Clear Plastic body, 3 Day Blinds

  • 1/8" SQUARE hole
  • Headrail size: 1" x 1"
  • Plastic Body, Metal Shaft, Hook & Sleeve included.

Our Price: $6.00
SET: Wire Hook & Clear Sleeve Cover for Wand Tilter

Clear Sleeve Cover for Wand Tilt Mechanism. Use with wire shown in picture as a set.

Our Price: $1.00
Vertical End Control, Wand type . For 3 Day Blinds

Commonly used on Hunter Douglas Paramount Vertical Blind, curved headrail

Our Price: $20.00
Baton Front Connector, Clear Plastic

  • Allows positioning of the Baton on front of drapery, for exposure.
  • Attaches through the drapery to the master carrier.
  • Made of clear Lexan.
  • Minimum quantity order: 10

Our Price: $1.00
Stainless Steel Clip for Baton or Wand

  • Stainless steel Clip. Will not rust. For use with Baton or Wand
  • Great for use in beach homes or with Flame Retartdent treated fabrics.
  • Minimum quantity order: 10

Our Price: $1.00
D Ring Stainless Steel Clip for Baton or Wand

  • D Ring Stainless steel Clip. Will not rust. For use with Baton or Wand
  • Great for use in beach homes or with Flame Retartdant treated fabrics.
  • Minimum quantity order: 10

Our Price: $1.00
Baton, Vinyl coated steel rod for drapes & curtains

  • Rigid for pushing or pulling draperies back and forth.
  • White colors blend with most linings.
  • Swivel snap allows for operation from any angle.
  • 29" Vinyl coated steel rod will not corrode or rust.
  • Available in White.
  • Almond and Brown color can be Special Ordered
  • Longer Length 39", 49", 59" can be Special Ordered
  • Our Price: $8.99
    Wand Tilter 1" Mini Blind. For Hunter Douglas cordless literise blind

    Mini Blind Tilt Mechanism for 1" Horizontal Blind. Wand Type

    Our Price: $10.00
    2" Cord Tilter, SQUARE hole. High Profile.

    • 1/4" SQUARE hole
    • High Profile 2"

    Our Price: $10.00
    Wand Tilter Key Shaped Hole for Wood, Venetian Blind. Low Profile

    • 1.5" low profile.
    • Clear Plastic body with metal shaft & gear
    • Key Shaped Hole
    • Use in Levolor blinds & other brands

    Our Price: $12.00
    Wand Tilter Key Shaped Hole for Wood, Venetian Blind. High Profile

    • 2" High profile.
    • Clear Plastic body with metal shaft & gear
    • Key Shaped Hole
    • Use in Levolor blinds & other brands

    Our Price: $12.00
    Wand Tilter 1" Mini Blind, HEX Hole for 3DayBlind

    • 1/4" HEX shaped hole
    • Headrail size: 1" x 1"
    • Metal Body & Shaft. Long stem

    Our Price: $12.00
    Metal Wand Tilter 1/4" SQUARE Hole for 2" Wood, Venetian Blind. High Profile

    • 2" high profile.
    • Metal body with long, skinny metal stem
    • 1/4" SQUARE hole
    • Use in 3Day-Blind blinds & other brands

    Our Price: $10.00
    Wand Tilter 1/4" Hex Hole for 2" Wood, Venetian Blind. Low Profile. Clear

    • 1.5" low profile. Clear body with metal shaft & gear.
    • 1/4" HEX hole
    • Tilt Shaft has hook & sleeve

    Our Price: $9.00
    Bali, Graber Wand Tilter 1/4" SQUARE Hole for Wood, Venetian Blind. Low Profile

    • Wand Tilt Mechanism for Wood, Faux Wood, Venetian Blinds.
    • 1.5" low profile.
    • White Plastic body with metal shaft & gear
    • 1/4" SQUARE hole

    Our Price: $12.00
    Vertical End Control, bead chain #10. For 3Day Blind

    Vertical End Control, bead chain #10. For 3Day Blind

    Our Price: $12.00
    Wand Tilter 1" Mini Blind, mini rectangle tilt rod with round edges

    • 5/32" Rectangular shaped hole with curved egdes
    • Headrail size: 1" x 7/8"
    • White Plastic Body, Gear & Shaft

    Our Price: $6.00
    Vertical Wand Control. Single Groove Hole. For 3Day Blind. Low

    • End control set, Wand Type for Vertical Blinds. Low profile
    • Commonly used on 3 Day Blind Vertical.
    • Single Groove Hole

    Our Price: $12.00
    Vertical End Control Set, Wand Type. Flat End Cap, use with 4 prong or 8 prong

      Flat End Cape, use with 4 prong or 8 prong
    • Wand Type

    Our Price: $9.00
    Vertical End Control Set, Wand Type. CONCAVE End Cap, use with 4 prong or 8 pr

    • CONCAVE End Cape, use with 4 prong or 8 prong
    • Wand Type

    Our Price: $9.00