Home > Shutter Repair > Tilt Bar, Tilt Bar End Cap - Shutter
All our shutter parts, repair kits do not require any special skills. Just a bit of patience, follow the instructions on our our videos and your shutter would be working beautifully again. If you are new at shutter repair, please check out the shutter diagrams to learn the terminologies & locate your parts.

Common material for shutter tilt rods are: Vinyl/polysatin, Wood, or Composite Wood/Hybrid. Our tilt rod comes in 2 sizes: 24" or 36". Custom length is also available per your request.

Shutter Rods, AKA: Tilt Bars, are the vertical bars used to adjust louver positions. They control rotation of louvers in a coordinated manner for control of light, privacy, and ventilation.
  • Front Tilt Bar is typically mounted in the center FRONT of louvers.
  • Rear Tilt Rod can be mounted to the Right or Left edge on the BACK louvers.
  • The best way to tilt the louvers is: Grab 1 louver and tilt. Avoid grabbing the Tilt Bar to tilt as it creates more stress on the staples or plastic connectors, hence faster wear & tear & breakage.
Our shutter rods are available in precut size of 24", 36", and 48". You can also order custom cut length.
Sort By:
Page of 1
#1, Front Tilt Bar Vinyl with Caps.  Hollow Core. Off White. Eclipse. Shutter Rod #1, Front Tilt Bar Vinyl with Caps. Hollow Core. Off White. Eclipse. Shutter Rod

  • KIT Includes: 1 Tilt Bar & 2 End Caps
  • Select Length: 24", 36", or 48"
  • Front Tilt Bar Vinyl.  Hollow Core. Off White
  • Commonly used with: By The Ways, Summer Wind, Hunter Douglas shutter

Our Price: $18.00
#2, Compact Front Tilt Bar Vinyl with End Caps.  Hollow Core. Off White. Palm Beach Shutter #2, Compact Front Tilt Bar Vinyl with End Caps. Hollow Core. Off White. Palm Beach Shutter

  • KIT includes: 1 Tilt Rod & 2 End Caps
  • Select  Length: 24", 36", or 48"
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach shutter

Our Price: $18.00
#2, CUSTOM CUT & PREDRILLED (13/64" drill bit). Front Tilt Bar Vinyl with End Caps.  Hollow Core. Off White. Palm Beach Shutter #2, CUSTOM CUT & PREDRILLED (13/64" drill bit). Front Tilt Bar Vinyl with End Caps. Hollow Core. Off White. Palm Beach Shutter

  • KIT includes: 1 Tilt Rod & 2 End Caps
  • Select  Length: 24", 36", or 48"
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach shutter

Our Price: $30.00
#1, Custom Cut Length Front Tilt Bar Vinyl with  End Caps.  Hollow Core. Off White. Eclipse By The Ways. Shutter Rod #1, Custom Cut Length Front Tilt Bar Vinyl with End Caps. Hollow Core. Off White. Eclipse By The Ways. Shutter Rod

This is a CUSTOM CUT tilt bar. So please specify exactly the length. When you are at final step of Check Out, there's NOTE box that you can specify exactly how long is your Tilt Rod.

  • Select (up to) 24" OR (up to) 36", for check out purposes only
  • Front Tilt Bar with Hollow Core. Vinyl. Off White
  • Commonly used in Shutter: Vinyl, Polysatin, Hunter Douglas Summerwind, BytheWays Eclipse
  • Include 2 End Caps

Our Price: $25.00
REAR TILT BAR, CUSTOM CUT & PREDRILLED (13/64" drill bit). Off White. Palm Beach Shutter REAR TILT BAR, CUSTOM CUT & PREDRILLED (13/64" drill bit). Off White. Palm Beach Shutter

  • Slim, rectangle-shaped Tilt Rod
  • Custom order with desired number of holes & spacing
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach shutter

Our Price: $22.00
(#2) End Cap for Vinyl Front Tilt Bar with Hollow Core. Shutter. (#2) End Cap for Vinyl Front Tilt Bar with Hollow Core. Shutter.

  • End Cap for Front Tilt Bar with Hollow Core.
  • Vinyl. Off White
  • Commonly used in Vinyl, Polysatin,  Hunter Douglas Palm Beach
  • INSTRUCTIONS

Our Price: $2.00
(#1), End Cap for Front Tilt Bar, Polysatin Shutter (#1), End Cap for Front Tilt Bar, Polysatin Shutter

  • White End Cap for Front Tilt Bar Shutter to provide a seamless look.
  • Keep Sliders (louver connectors) from gliding out of tilt rod.
  • 2 end caps are inserted into both ends of a tilt bar.
  • Fit Hollow Core Tilt Bar, part 5248. Tilt Bar NOT included
Use together with Slider Connector 1756 OR 1757, and Tilt bar 5248

Please note there is a similar end cap, part 6007. It has the same function but with different size & fit. Please inspect the 2 end caps carefully to make sure you get the right part.

Our Price: $2.00
Shutter Tilt Bar Vinyl, Hybrid, Wood Comparison Shutter Tilt Bar Vinyl, Hybrid, Wood Comparison

1st Picture From Left to Right:

  • Part 1476, vinyl Tilt Bar
  • Part 5248, vinyl Tilt Bar
  • Wood Tilt Bar
  • Hybrid Tilt Bar

(#3), Old Style End Cap for Front Tilt Bar, Polysatin Shutter (#3), Old Style End Cap for Front Tilt Bar, Polysatin Shutter

  • Old Style, White End Cap for Front Tilt Bar Shutter
  • Keep Sliders from gliding out of tilt rod. End cap is inserted into both ends of a Tilt Bar.
  • Fit Hollow Core Tilt Bar. Tilt Bar NOT included
Use together with Slider Connector 1756 OR 1757

Please note there is a similar end cap, part 5217. It has the same function but with different size & fit. Please inspect the 2 end caps carefully to make sure you get the right part.

Our Price: $2.00