WALL mount. Luminette Installation Brackets KIT. Pack of 2

• WALL Mount
• Mounting Brackets for Hunter Douglas Luminette vertical shades
• Pack of 2 Mounting Brackets
• 4 Wall Spacer, 2 clear shims
• 4 screws, 1.5" long

CEILING Mount. Luminette Installation Brackets KIT. Pack of 2

• CEILING Mount brackets for Luminette
• Mounting Brackets for Hunter Douglas Luminette vertical shades
• Pack of 2 Mounting Brackets
• 4 screws, 1.5" long

HEX, WAND Tilter 1/4" Modified Hex Hole for 2" Wood, Venetian Blind. Low Profile. Gray. Hunter Douglas

• 1.5" low profile.
• Grey plastic body with meta shaft & gear
• 1/4" Modified HEX hole

KIT. Restring Record KIT for shade. 0.9mm string

Hunter Douglas Record KIT includes:

• 1 Roll of 100ft 0.9mm string.
• 4 large cord guides, 4 small cord guides
• 4 pocket & ferrules
• 2 cord cleats
• Washers
• Tassels & Condensers
• Restringing Tool
• How to Restring Instruction Booklet

Vertical End Control, #6 bead chain, Rectangle Shape . For Hunter Douglas Permasure, Permatrak Blind

• Use with #6 bead chain for tilting
• Commonly used on Hunter Douglas Permatrak, PermAlign Vertical Blind, rectangle shaped headrail

Vertical End Control, #6 bead chain. GRAY . For Hunter Douglas Permatrak Vertical Blind

• End control set,  Rectangle Shape, for Vertical Blinds.
• Width = 1 7/8". Height = 1 1/4"
• Use with #6 bead chain for tilting
• Commonly used on Hunter Douglas Permatrak, Permasure Vertical Blind
• Grey Plastic

Tape Roll, Drum for Mini Blind. Small D Hole. Hunter Douglas

• Tape Roll, Drum for 1", 1.5" Mini Blind
• 3/16" D Shaped Hole
• Grey Plastic
• Use with 1" Ladder String

HEX, Wand Tilter 1/4" Hex Hole for 2" Wood, Venetian Blind. Low Profile. White

• 1.5" low profile.
• White plastic body with zinc gear & plastic stem. Riveted.
• 1/4" HEX hole

SQUARE, WAND Tilter 1/4" SQUARE Hole for 2" Wood, Venetian Blind. High Profile, Metal Shaft & Gear

• 2" high profile.
• White plastic body with meta shaft & gear
• 1/4" SQUARE hole

HYBRID, Hidden Valance Clip for Wood, Faux Wood Blind. 2 5/8" Clear. Hunter Douglas

• Valance Clip for Hunter Douglas Wood, Faux Wood Blinds
• Measure: 2 5/8" Top to Bottom.  2 1/8" in between clips.
• Clear Plastic. UV Resistance
• Hidden Clips clip behind the valance
• Slim, narrow grip at Bottom of clip.  Wider grip at Top of clip
• Minimum Order Quantity: 3

OVER THE TOP, Valance Clip for Wood, Faux Wood Blind. 2 1/2"

Restring KIT. 4 Flat tape ribbon lift set. Restring Tool. 4 Pocket & Buckle.

• Save over 30%, KIT includes:
  • 4 Flat tape ribbon lift set.
  • 1 Wire Restring Tool
  • 4 set of Pocket & Buckle

Large Cord Lock 3/4" for Hunter Douglas Duette. Select LEFT or RIGHT

Newly redesigned with metal reinforced cord  guide to protect your strings from sharp abrasions.

Small Cord Lock 3/8" for Hunter Douglas Duette. Select LEFT or RIGHT

Newly redesigned with metal reinforced cord  guide to protect your strings from sharp abrasions.

Transmission for Duette, Pleated, Honeycomb Shades. Cordless Literise

• Transmission for Duette, Honeycomb, Pleated Shades
• Cordless, Literise
• Commonly used in Hunter Douglas Literise Duette, Applause, 3 Day Blind cordless honeycombs.

End Cap for Silhouette & Nantucket Clutch. Standard size

• 1 End Cap, Select Left OR Right
• STANDARD Size End Cap for  Clutch, Silhouette & Nantucket
• Color: Off White (1702), Lt beige, Garden Wht (5497)
• Price is for 1 end cap

NOTE: larger end cap is available, oversized, make sure you compare and select the right size.

Cord Loop Restring KIT with Cord Tensioner & Cord Anchor

KIT includes:

• 1 Cord Loop, Natural off white color
  • Select cord thickness: D30, K35, C30
  • Select Loop Length: 3ft, 4ft, 5ft
• 2 Clear Cord Anchors with 3 screws. 1 anchors for inside mount, 1 outside mount.
• 1 Tensioner
• 1 Tensioner Instruction Booklet

Tilter Lock

• Black Plastic Tilter Lock
• Wedge between shaft/rod & hole of tilter to minimize movement

0.9mm Lift Cord, 300ft spool for shades

0.9mm cord, 100 yard spool. Commonly used to restring: honeycomb, cellular, roman, roller shades.

• Polyester fiber - resists effects of sunlight better than nylons and mono-filaments.
• Small diameter makes it inconspicuous.
• 0.9 mm has 35 lb. tensile strength.
• All cords are braided to minimize stretch and reduce friction

Plastic Tassel Hunter Douglas. Trapezoid shape

• Plastic Tassel with Hunter Douglas Logo
• Color Option: White, Ivory (Rich Cream), Beige (Honey Bisque)
• Minimum Order Quantity applied when added to Cart

What is POWERVIEW? Remote Control Benefits?

What is Powerview? Benefits of App, Remote Control

KIT 1SET. IVORY: 2 Hunter Douglas Tassel , 1 Condenser, 30" Pulling Cord - Natural Ivory

KIT includes:

• 2 IVORY Hunter Douglas Plastic Tassels, 1528
• 1 Equalizer Housing, 1485
• 1 Cord Clips Equalizer, 1510
• 30in (2.5FT) of 2.2mm Natural Color Pulling Cord
• Instructions on how to assemble the kit is in the pictures

Lift string 0.9mm NOT included. If your internal lifting strings are broken, you also need to buy the 0.9m cord to complete the repair.

Remote Control v2. Round with CR2032 Batteries. Hunter Douglas Powerview

Intelligent, Convenient. Remotely Open/Close, Tilt Vanes of your blinds & shades from 30ft away.

• Round Remote Control, v2
• Hunter Douglas Powerview
• Select Remote Control Color: White (5872) OR Black (5873)

SET: Powerview HUB v2, AND Repeater

SET Include:

• PowerView HUB v2, white
• Signal Repeater, white
• USB power Suppl
• DC Power Supply
• Ethernet Cable

How to Setup Remote Control WITHOUT HUB

How to Setup Remote Control WITHOUT HUB

How to Open/Close/Tilt Motorized Shades with Remote Control Powerview

How to Open/Close/Tilt Motorized Shade with PowerView Remote Control

How to Setup Powerview HUB with APP and Remote Control

How to Setup Powerview HUB with Smart Phone, Tablet, and Remote Control

Metal Tape Roll, Drum for Mini Blind. Small D Hole

White Plastic Tape Roll, Fit Small D hole for 1" blind, Cara System

SET. Hunter Douglas Designer Tassel with Condenser & 36" pull cord

• Premium Designer Tassel with Hunter Douglas Logo
• Clear Plastic
• Oval shape

Heavy Duty Drapery Pin Hook for Drapes & Curtains

• Heavy Duty Drapery Hook Pin
• Used to hang pleated Drapes or Curtains
• Minimum Order Quantity: 10

Traverse Rod Glides for Drapes & Curtains

• UV Resistance. White Plastic
• Used with Hooks/Pins to hang drapes, sheers

Metal Tape Roll/ Drum for 2" Wood, Venetian Blind. Modified HEX hole.

• 1/4" Modified HEX HOLE
• Use with Ladder String

Wand Tilter 1" Mini Blind, HEX Hole. White. For Hunter Douglas Blind

• HEX shaped hole
• Headrail size: 1" x 1"
• White Plastic Body. Metal Gear & Shaft.

Wand Tilter 1.5" Mini Blind, 1/4" HEX Hole. White. For Hunter Douglas Blind

• 1/4" modified HEX shaped hole with Notch.
• Headrail size: 1.5" x 1"

Wand Tilter 1" Mini Blind. D Hole. Grey. For Hunter Douglas blind

• D shaped hole
• Headrail size: 1" x 1"
• Gray Plastic Body. Metal Gear & Shaft.

Vertical End Control, #10 bead, Reduced Gear, Rectangle Shape . For Hunter Douglas Vertical Blind

Commonly used on Hunter Douglas Permatrak, PermAlign Vertical Blind, rectangle shaped headrail

KIT. 3/8" Installation Brackets for Honeycomb, Duette Cordlock type. Pack of 3

• Small Mounting Brackets for 3/8" cell size.
• Used in Hunter Douglas Duette Cordlock type and 3 Day Blinds Honeycomb Shades

Univ End Cap R2000 series RF carriers for 4003 track

• Heavy Duty Drapery Hook Pin
• Used to hang pleated Drapes or Curtains
• Minimum Order Quantity: 10

Wand Tilter for Mini Blind,1.5" x 1". HEX Hole. White.

• HEX shaped hole
• Headrail size: 1.5" x 1"
• White Plastic Body. Metal Shaft.

Vertical End Control, #6 bead chain . For Hunter Douglas Paramount Blind

• #6 bead chain for tilting
• Commonly used on Hunter Douglas Paramount Vertical Blind, curved headrail
• Ivory color

Wand Tilter 1" Mini Blind w Black Shaft Clip, Hex Hole. Metal.

• 1/4" Hexagon Hole.  Not all the way thru.
• Headrail size: 1" x 1"
• Metal Body, Shaft & Gear.

Wand Tilter 1" Mini Blind, 1/8" Square Hole. Plastic body w metal shaft

• 1/8" SQUARE hole
• Headrail size: 1" x 1"
• Plastic Body, Metal Shaft, Hook & Sleeve included.

Large Cord Lock 3/4" for Kirsch Levolor Honeycomb Shade

Large Cordlock 3/4" for Kirsch Levolor Honeycomb Shade

Small Cord Lock 3/8" for Kirsch Levolor Honeycomb Shade

Small Cordlock 3/8" for Kirsch Levolor Honeycomb Shade