3" slat. WAND Tilter 1/4" SQUARE Hole for Wood, Venetian Blind. High Profile, Metal Shaft & Gear. PWTS-W-G

• Wand Tilter for blinds with 3" slat, or 3.5" slat. Wood, Faux Wood, Venetian Blinds.
• Fit 2" high profile headrail, small punch
• White plastic body with metal shaft & gear
• Extra long stem
• 1/4" SQUARE hole
• This Tilt Gear comes with hook & sleeve

Shroud Cord

• Shroud Cord
• Typically attached to the back of roman shade to hold rings & lift cord neatly together. It helps to for even, level folds of front farbic.
• Price is per foot. Minimum order of 10ft

Wand Tilter 1" Mini Blind, HEX Hole. Clear Plastic body, 3 Day Blinds

• 1/8" SQUARE hole
• Headrail size: 1" x 1"
• Plastic Body, Metal Shaft, Hook & Sleeve included.

SQUARE, WAND Tilter 1/4" SQUARE Hole for 2" Wood, Venetian Blind. High Profile, Metal Shaft & Gear, PWTS-W-G

• 2" high profile.
• White plastic body with meta shaft & gear
• 1/4" SQUARE hole

HEX, CORD Tilter, HEX hole 1/4". Low Profile for 2" Wood Blinds. Precorded White, 20-4721

• 1/4" HEX shaped hole
• Low Profile 1.5"
• Metal Body

Clearview Joiner for 2.5", 3.5", 4.5" louver size. Vinyl Shutter. Off White color. M412. M418. M432

Clearview Joiner for Polysatin Shutters. Select size:

• 2.5" louver. Joiner Dimensions: 3/16" x 2 11/16" x 5/8". Part 6027
• 3.5" louver. Joiner Dimensions: 3/16" x 3 11/16" x 5/8". Part 5796
• 4.5" louver. Joiner Dimensions: 1/4" x 3/4" x 4 11/16". Part 6026

This Clearview Joiner is used to connect all of the louvers within a panel so that they all move at the same time. The joiners snap together creating a chain. the male end of the joiner slides in and locks into the female end of another joiner.

Used together with END Joiner, MALE & FEMALE.

LEFT stacked. Traverse Rod, Super Heavy Duty. Extendable from 48" to 156". WAND control

Super Heavy Duty Traverse Rod, Stack Left. Extendable from 48" to 156"

Worm Gear for Luminette (made after 2016). Hunter Douglas. 4250548000

• 3" Long  WC Worm Gear for Luminette. 2016 Revision
• If your luminette is hard to turn or non-responsive to tilting, replace the gears & the gear housing may solve your problem. Make sure you also inspect the white plastic bulk head cover for damaged signs.

Restring KIT. 2 Flat tape ribbon lift set with Restring Tool, Pocket & Buckle

Flat Tape Ribbon Spool, KIT includes:

• 2 spool of flat tape (select length of 5ft or 7.5ft)
• 2 sets of pocket & buckle
• Restring Tool

SET: Fabric Carrier & Clear Pin, Gen 1, for Duette Vertiglide Rail. Vertiglide made before SEP 2004. 2980107000. 2980108000

• SET includes: part 1825 carrier AND 5165 clear pin.
• Fabric Carrier for Old style Duette Vertiglide Headrail.
• Clear Snap Pin part #5165 is included.
• For Duette Vertiglide made before Sept 2004
• Use together with Bearing Wheel, part #1454, NOT included. Sold separately. Click here to order
• If your Vertiglide duette cells are hanging loosely or bulging, adding or replacing the Snap Pin & Fabric Carrier may solve the problem.

HEX, WAND Tilter 1/4" Modified Hex Hole for 2" Wood, Venetian Blind. Low Profile. Gray. Hunter Douglas. 5003768000

• 1.5" low profile.
• Grey plastic body with meta shaft & gear
• 1/4" Modified HEX hole

CEILING Mount. Luminette Installation Brackets KIT. Pack of 2. KIT8005

• CEILING Mount brackets for Luminette
• Mounting Brackets for Hunter Douglas Luminette vertical shades
• Pack of 2 Mounting Brackets
• 4 screws, 1.5" long