Wand Tilter 1" Mini Blind, Orange HEX Hole. Replaced with tilter 1121

• Compatible part 1121 will be shipped instead
• HEX shaped hole
• Headrail size: 1.5" x 1"
• White Plastic Body. Metal Shaft.

Louver Cuff Link Pin for FRONT Tilt Bar Shutter. Hunter Douglas Palm Beach. BCUFF1

• Louver Pin to connect Tilt Bar to shutter louver.
• Off White Silky Color
• Commonly used in Vinyl, Polysatin, Hunter Douglas Palmbeach shutter

Clearview JOINER for Plantation Shutter. Fit 2.5", 3.5" louver. Off White color. M424. M426

• Clearview JOINER for Plantation shutter. Off White Color
• Price is for 1 connector. Select Size:
  • 2.5" Louver. Joiner. Part 5870
  • 3.5" Louver. Joiner. Part 1758

This Clearview JOINER is used to connect all of the louvers within a panel so that they all move at the same time. The joiners snap together creating a chain. The pin in the middle of the joiner snaps into the holes of the Seamless Louver End Caps.

Clearview Joiner for 2.5", 3.5", 4.5" louver size. Vinyl Shutter. Off White color. M412. M418. M432

Clearview Joiner for Polysatin Shutters. Select size:

• 2.5" louver. Joiner Dimensions: 3/16" x 2 11/16" x 5/8". Part 6027
• 3.5" louver. Joiner Dimensions: 3/16" x 3 11/16" x 5/8". Part 5796
• 4.5" louver. Joiner Dimensions: 1/4" x 3/4" x 4 11/16". Part 6026

This Clearview Joiner is used to connect all of the louvers within a panel so that they all move at the same time. The joiners snap together creating a chain. the male end of the joiner slides in and locks into the female end of another joiner.

Used together with END Joiner, MALE & FEMALE.

5248, Front Tilt Bar Vinyl with 2 Caps. Hollow Core. Off White. Eclipse. Shutter Rod

• KIT Includes: 1 Tilt Bar & 2 End Caps
• Select Length: 24", 36", or 48"
• Front Tilt Bar Vinyl.  Hollow Core. Off White
• Commonly used with: By The Ways, Summer Wind, Hunter Douglas shutter

SET: Fabric Carrier & Clear Pin, Gen 1, for Duette Vertiglide Rail. Vertiglide made before SEP 2004. 2980107000. 2980108000

• SET includes: part 1825 carrier AND 5165 clear pin.
• Fabric Carrier for Old style Duette Vertiglide Headrail.
• Clear Snap Pin part #5165 is included.
• For Duette Vertiglide made before Sept 2004
• Use together with Bearing Wheel, part #1454, NOT included. Sold separately. Click here to order
• If your Vertiglide duette cells are hanging loosely or bulging, adding or replacing the Snap Pin & Fabric Carrier may solve the problem.

SQUARE, WAND Tilter 1/4" SQUARE Hole for 2" Wood, Venetian Blind. High Profile, Metal Shaft & Gear, PWTS-W-G

• 2" high profile.
• White plastic body with meta shaft & gear
• 1/4" SQUARE hole

Clear Condenser. Small. 2930563. 2930564

• Clear Condenser. Small
• Condenses multiple inner lift cords into 1 outer pulling cord.  Fit Maximum 3 @ 0.9mm cords.
• Cord condenser is 2 separate pieces that screw together, keeping the knot contained inside. UV Stable
• Price is 1 set: Upper & Lower connector

Large Cord Lock 3/4" for Hunter Douglas Duette. Select LEFT or RIGHT. 297009

Newly redesigned with metal reinforced cord  guide to protect your strings from sharp abrasions.

Worm Gear for Luminette (made after 2016). Hunter Douglas. 4250548000

• 3" Long  WC Worm Gear for Luminette. 2016 Revision
• If your luminette is hard to turn or non-responsive to tilting, replace the gears & the gear housing may solve your problem. Make sure you also inspect the white plastic bulk head cover for damaged signs.

KIT. Restring Record KIT for shade. 0.9mm string, 5101335000

Hunter Douglas Record KIT includes:

• 1 Roll of 100ft 0.9mm string.
• 4 large cord guides, 4 small cord guides
• 4 pocket & ferrules
• 2 cord cleats
• Washers
• Tassels & Condensers
• Restringing Tool
• How to Restring Instruction Booklet

Restring Tool. Fabric Lacing Needle. 6" long needle loop

• Deluxe Fabric Lacing Needle by Hunter Douglas
• 6" long needle loop plus 3" long white plastic handle. Total length 9 inches.
• Use to threat cord, strings thru fabric stack (honeycomb, pleated...) or slats (wood blind, mini blind...)
• Premium blind & shade restring, record tool